|
Re: My fitting story
I didn't make up what I posted on frequency meters. I asked the largest shaft maker in the world about them and the things I posted was directly from the reply I got for True Temper. I don't know who you asked, but I'm guessing it was your club maker, not from True Temper. I have also been told the exact same thing by half a dozen custom club makers. They all agree that the meter only measures the stiffness of that section of shaft that is in the clamp. If the clamp is 4 inched wide, and you have a 46 inch driver, the shaft will be about 45 inches long, with one inch or so inside the hosel. That means about 44 inches of the shaft is going to be bending. If you measure only 4 inches on the butt end, you're only measuring about 9 percent of the entire shaft. What about the other 91 percent?
Incase you still don't believe me or what I posted, I recommend you contact TT yourself and ask them. That's exactly what I did, and I'm just passing on what the TT rep sent to me in his reply. If I still have his reply on file, I'll post it so the rest of the members here can have the facts.
|