|
Re: Removal of Ping Putter Shaft
I once ran into this problem with my old Ping A-Blade, very similar to Anser. Simply cut the shaft just above the hosel, put head in a vise, and using a drill bit (must be a sharp one) that most exactly fits down the remaining shaft drill out the ball bearing. Then a little heat and VOILA!
__________________
Driver : Callaway Big Bertha Titanium 454 10* Stiff True Temper Dynamic Gold Graphite shaft
3 Wood : Callaway Big Bertha 2004 Rifle 6.5 shaft
3 Hybrid : Callaway Heavenwood 3H 20* Rifle 6.5 shaft
Irons : 4 - LW Callaway X-18 Pro Series Rifle 6.0 2* flat
Putter : Ping Eye 2
Ball : Titleist ProV1
|