[SolidRockGolf]

Here is another way to do the Dampening inserts. Actually this was one if not the first way it was done in the PGA Tour Vans...

First you need plastic straws, weather stripping, elmers spray glue, and an old shaft.

1-Cut a straw to about 5" in length
2-Us the adhesive side of the stripping and stick it to the straw as you wrap it around closely packed from top to bottom.
3-Spray the stripping with the elmers glue and place it in the butt of the shaft gently.
4-Use the old shaft to slowly push the insert as far as you can get it without damaging it. It should be tightly wedged in the shaft.
5-Now your done and can grip the club to finish.

Works great, feels great, and the cost is alot easier on the pocket.

Hope this helps.

Christian